The name most often used to describe the universal joints on a conventional rear-wheel drive vehicle drive shaft is ________.
A) CV
B) Spider
C) Cardan
D) Trunnion
C) Cardan
You might also like to view...
Most brake experts and vehicle manufacturers recommend replacing brake lining when the lining thickness is ________
A) 0.050 in. (1.3 mm) B) 0.040 in. (1.0 mm) C) 0.060 in. (1.5 mm) D) 0.030 in. (0.8 mm)
The cabin filter can be accessed from _________
A) Under the hood on some vehicles B) Under the dash on some vehicles C) Under the vehicle on some vehicles D) Either A or B
Vertical letters are formed from bottom to top and sloped letters are titled about 20 degrees off vertical.
Answer the following statement true (T) or false (F)
Technician A says that a break-out box (BOB) used to access the BUS terminals while using a scan tool to activate the modules Technician B says that a typical 38-cavity diagnostic connector as found on many BMW and Mercedes vehicles under the hood. Who is right?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician