One difference between MOSFETs and JFETs is that the gate of the N-channel depletion MOSFET can also be made ____ with respect to the source. This cannot be done with a JFET because it would cause the gate and channel PN junction to be ____ biased.

A. positive, forward
B. positive, reverse
C. negative, forward
D. negative, reverse


Answer: A

Trades & Technology

You might also like to view...

What are the top and bottom horizontal parts and the vertical part of an I-section called?

What will be an ideal response?

Trades & Technology

Chips can be made manageable and safe to the operator by using:

A) Feeds and depths of cut that contribute to chip breaking and by using chip breakers on tools B) Large back rake and side rake angles on tools to contribute to the smooth flow of an even uniform chip C) A hook tool to remove them as soon as they are produced and by wearing gloves to protect you hands D) A piece of wood to break them into smaller chips

Trades & Technology

All of these are OBD-II requirements EXCEPT ________

A) Detect component degradation or faulty emission control operation B) Tell the technician what is wrong with the engine C) Alert the driver of necessary emission-related repairs or service D) Use standardized DTCs and accept a generic scan tool

Trades & Technology

Eleven holes drilled around a circle are equally spaced. How many degrees, minutes, and seconds are between the centers of the holes? Express the answer to the nearest second.

A. 28 degrees 33 minutes 21 seconds B. 29 degrees 5 minutes 23 seconds C. 31 degrees 53 minutes 19 seconds D. 32 degrees 43 minutes 38 seconds

Trades & Technology