The difference between a D-latch and an edge-triggered D-type flip-flop is that the latch:
A) is controlled by the logic level at its ENABLE input rather than a CLK transition.
B) triggers on either the rising or falling edge of an ENABLE signal rather than the CLK input logic level.
C) always "latches" the Q output to the complement of the D input regardless of other inputs.
D) always "latches" the Q output to the D input regardless of other inputs.
A
You might also like to view...
Activated charcoal filters are used mainly to remove _____.
a. mold spores b. bacteria c. gaseous vapors d. pollen
On a typical in-line 6 cylinder, 4-stroke cycle diesel engine, when piston #5 is at TDC on it's compression stroke, which valves can be adjusted?
A. #5 B. #2 C. #4 D. #6
If the water garden is large enough, it becomes self-sustaining and does not require the same maintenance and cleaning concerns that are needed by smaller water gardens
Indicate whether the statement is true or false
Goats are susceptible to internal parasite or worm overload.
Answer the following statement true (T) or false (F)