?When are air carbon arc cutting electrodes that connect normally required?
A. ?For overhead gouging to make the electrodes longer so you are out of the way of falling sparks.
B. ?When gouging inside of a pipe or cylinder so the area being gouged can be reached.
C. ?For track-type cutting operations.
D. ?All of the above.
Answer: C
You might also like to view...
The documentation, called a design proposal, can consist of ____ design (CAD) drawings.
A. conventional architectural B. computer-actuated C. computer-aided D. conventional assessment
Which of the following is LEAST-Likely to be found in the lubrication service manual?
A. Cooling and air-conditioning system capacities B. Cooling system air bleed locations C. Maintenance schedule D. Wheel lug torque specifications
Technician A says that the crankshaft determines the stroke of an engine. Technician B says that the length of the connecting rod determines the stroke of an engine. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A high-voltage, high-frequency current used in GTAW work creates an arc that can jump a gap of about _____
A) 3/4 inch (19.1 mm) B) 1 inch (25.4 mm) C) 1/2 inch (12.7 mm) D) 1/4 inch (6.4 mm)