Dimension numerals are displayed:
A. in feet and inches for all lengths over 12"
B. inches and fractions are used for units less than 12"
C. with foot units are followed by the foot (') symbol and inch values by the inch symbol (")
D. applications vary among companies, and it is possible to find some prints with the feet and inches symbols omitted
E. all of the above
Answer: E
You might also like to view...
An RC vehicle is powered with battery voltage VB = 12V. Four identical lamps, each having resistance RL = 10?, connect in series to the battery. The current passing through the lamps IL equals ___ A and the voltage across each lamp VL equals ___ V.
Fill in the blank(s) with the appropriate word(s).
What is the difference between a primary beam and a secondary beam in a steel frame structure?
What will be an ideal response?
Design a three-phase heater with suitable symmetric loads using wye-connected pure resistance. Assume that the heater is supplied by a 240-V line voltage and is to produce 27 kW of heat.
What will be an ideal response?
When brakes are applied, the brake shoes will press against the:
a. Brake drum or disc. b. S-cam. c. Slack adjuster.