Why should pliers NOT be used to tighten bolts and nuts?
A) It is too difficult to get the pliers to fit the nut. B) They will round off the corners.
C) They will strip the threads of the bolt. D) They will overtighten the nut.
B
You might also like to view...
238.237 - 190.30 x 0.372 + 32.9303 x 2 = ____. Round to two decimal places.
A. 190.38 B. 233.31 C. 233.30 D. 101.53
A 12-in.-thick hollow-core floor slab will generally span up to approximately
A) 25 ft. B) 40 ft. C) 30 ft. D) 20 ft. E) none of the above.
Los colgantes para tuberías:
a. suelen dejarse sin aislamiento. b. no son necesarios en los servicios con agua caliente. c. se aíslan para protección personal. d. suelen necesitar que el aislamiento se corte para encajar en los soportes.
At the completion of the Cummins HPI-TP injector pumping stroke, where is the fuel in the timing chamber routed?
A. engine cylinder B. drain circuit to IFSM C. directly to fuel tank D. spilled to rocker housing