A(n) ____ hole is one that has been machined to a larger diameter for a specified depth so that a bolt or pin will fit into this recessed hole.
A. countersunk
B. extension
C. chamfered
D. counterbored
Answer: D
You might also like to view...
What would most likely be on the “must” do list?
A. Driver side window that won’t roll down B. Tires that have 5/32 inch of tread and no other defects found C. Windshield wiper blades that do not have any rubber on the blade and metal is touching the glass D. Antifreeze that is just below the “full” line in the overflow tank and has no evidence of leaks
A grease fitting can be called _______
A) Alemite fitting B) Grease fitting C) Zerk fitting D) Any of the above
The sampling frequency for a 10 KHz input signal should be ________ samples per second
A) at least 20,000 B) at most 10,000 C) at most 5,000 D) at least 10,000
Technician A says as an employee your obligation is to be a loyal, caring individual, and have the ability to follow directions. Technician B says that you are not entitled to a clean, safe place to work. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B