Tech A says bearings pressed onto the axle can be removed with a hammer and a drift punch. Tech B says bearings can be removed by cutting the bearing with an oxyacetylene torch. who is correct?

A. a only
B. b only
C. both a and b
D. neither A nor B


D. neither A nor B

Trades & Technology

You might also like to view...

The NEC requires ground fault circuit interruptor protection for ____________________ safety.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

The most common refrigerant used in older room air conditioners is ____.

A. R-12 B. R-22 C. R-410A D. R-500

Trades & Technology

If two loads with different voltage levels had to be switched with a single break type device, you would have to choose a switch that had a minimum of two poles

Indicate whether the statement is true or false

Trades & Technology

Will a flush-mount electric panel requiring an opening depth of 4 3/4" properly fit within the chase of a 6-inch block wall if the width of the blocks' face shells are 1 1/4"?

What will be an ideal response?

Trades & Technology