Discuss the three positions of welding
What will be an ideal response?
Horizontal welding is made by moving horizontally across a vertical piece of metal. The metal is
placed so that it is comfortable to run a bead across the surface. A sitting position is recommended. A
vertical downward weld is made by moving downward across a vertical piece of metal. They are easy
to make but shallow. A vertical upward weld is made by moving upward across the metal. They are
difficult because heat builds up in the metal as the weld progresses up the metal. Special movements
are used to control the heat and permit individual parts of the puddle to cool. In overhead welding, the
metal is positioned above the welder who is sitting. The electrode is held nearly straight up and down.
You might also like to view...
Harmonics are voltages or currents that operate at a frequency that is ____ the fundamental power frequency.
A. a multiple of B. a divisor of C. double D. within 10 Hz of
Milk production is rapidly increasing in all BUT which of the following?
a. Pakistan c. China b. Russian Federation d. Brazil
__________ use a propeller-type assembly placed inside the fluid to generate a signal via a magnetic pickup sensor positioned nearby, but outside of the fluid.
A. Turbine flowmeters B. Target flowmeters C. Sail flowmeters D. Magnetic flowmeters
When two or more wired partitions are electrically connected together, the cord must be terminated at an attachment plug-and-cord connector equipped with a _____.
a. strain relief device b. stress relief device c. site-isolating device d. positive locking device