Technician A says that MAP sensors use a 5-volt reference voltage from the PCM. Technician B says the MAP sensor voltage will be higher at idle at high altitudes compared to when the engine is operating at near sea level. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
C
You might also like to view...
Wood or steel frames installed between inner and outer wall forms to create window or door openings are called _____.
a. spacers b. holdouts c. bucks d. lintels
Which statement regarding high voltage circuitry in HEVs is NOT correct?
A) The system may be energized with the ignition ON and the engine OFF B) The system is disabled when the ignition switch is off C) The HV system is not energized when the ICE is in idle stop mode and the electric A/C compressor is running D) The system is energized when the ICE is running and the vehicle is accelerating
If 18 V and 6 V sources are connected in series opposing, what is the total voltage?
A) 12 V B) 6 V C) 18 V D) 2 V
Which type of collapse occurs when a small area of structural damage results in a loss of localized load-carrying capability, initiating a chain reaction of subsequent failures resulting in major structural failure?
A) Total collapse B) Progressive collapse C) Partial collapse D) Pancake collapse