The compressor on a refrigerated air drier
A) Energizes when the air flow sensing switch is closed
B) Operates based on 5 minute on and off cycles
C) Operates constantly
D) Changes in speed to match the load based on air flow through the drier
C
You might also like to view...
You can find out what the kerf width is for a torch by making a sample cut in scrap metal and measuring its ____________________.
Fill in the blank(s) with the appropriate word(s).
Letter E is pointing to a(n) _____.
a. soleplate
b. optional header design
c. partition wall assembly
d. sole plate
Four wheel steering is being discussed. Technician A says that opposite phase steering is best at high speeds. Technician B says that same phase steering is best at low speeds. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
The proper order in which to perform a four-wheel alignment is ________
A) Rear camber, front camber, caster, front toe, rear toe B) Front camber, caster toe, rear camber, then rear toe C) Front toe, camber, front caster, rear camber, then rear caster D) Rear camber and toe, front camber, caster, then front toe