The process of forging the material helps it retain its original grain structure.
Answer the following statement true (T) or false (F)
True
You might also like to view...
The major disadvantage of cutting with the wet saw is that _____ .
A. thin, delicate cuts are not possible B. the masonry unit becomes soaked with water C. it is much slower than dry cutting D. the dust problem is increased with wet cutting
The primary (low-voltage) ignition system must be working correctly before any spark occurs from an ignition coil. Which of these component is NOT in the primary ignition circuit?
A) Spark plug wiring B) Ignition switch C) Ignition module (igniter) D) Pickup coil (pulse generator)
In older zoning systems that use a master thermostat, the other zone thermostats _____
a. cannot control the system mode of operation b. can control the system mode of operation c. can control the mode but not the zone temperature d. cannot control the mode or the zone temperature
The length of a building is 40 feet 9 inches and the width is 32 feet 6 inches. What is the perimeter of the building in feet?
Fill in the blank(s) with the appropriate word(s).