The lockwasher used on a 3/8-inch bolt has a 17/64-inch inside diameter and a 3/4-inch outside diameter. What is the difference in inches between the inside and outside diameters?
A. 27/64
B. 29/64
C. 31/64
D. 33/64
Answer: C
You might also like to view...
PROBLEM 2.9
A 9-kN tensile load will be applied to a 50-m length of steel wire with E = 200 GPa. Determine the smallest diameter wire that can be used, knowing that the normal stress must not exceed 150 MPa and that the increase in length of the wire must not exceed 25 mm.
Probably the easiest way to determine what size lumber was used to frame a house is to inspect the _____________________.
Fill in the blank(s) with the appropriate word(s).
Technician A states oxygen is a non-flammable gas that can be safely used and stored in a shop environment. Technician B states oxygen can be used as an alternative to compressed air. Which technician is correct?
A. Technician A only. B. Technician B only. C. Both A and B. D. Neither A nor B.
What is the resistance of a piece of copper wire that has a size of 2.5 mil-feet if 1 mil-foot has a resistance of 10.4 ohms?
Fill in the blank(s) with the appropriate word(s).