When re-ringing a block, what is the maximum amount of upper cylinder taper wear allowed by most aftermarket piston ring experts?
What will be an ideal response?
For re-ring jobs, 0.004-0.006" is now considered to be the maximum allowable upper cylinder taper wear by most aftermarket piston ring experts.
You might also like to view...
Superheated ammonia enters a mixing chamber at a pressure of 50 psia at a mass flow rate of 5 lbm/s. Saturated liquid ammonia enters the chamber at a rate of 0.60 lbm/s, at 50 psia. Heat is lost from the chamber at a rate of 125 Btu/s. If the combined exit flow is saturated vapor ammonia at 50 psia, determine the temperature of the superheated ammonia which entered the chamber.
State 1: Vapor inlet; State 2: Saturated liquid inlet; State 3: Outlet Given: P1 = P2 = P3 = 50 psia; m?1= 5.0 lbm/s; x2 = 0.0; m?2=0.60lbms; x3 = 1.0; Q?=?125 Btu/s Assume: Given no other information regarding the mixing chamber, make the following common assumptions: W?=?KE=?PE=0 Also, assume the mixing chamber is a multiple-inlet, single-outlet, steady-state, steady-flow device. What will be an ideal response?
What is the correct order of anatomical structures internal to external?
A) Ovary, uterus, cervix, oviduct, vagina B) Oviduct, ovary, cervix, uterus, vagina C) Ovary, oviduct, cervix, uterus, vagina D) Oviduct, cervix, ovary, uterus, vagina E) Ovary, cervix, oviduct, uterus, vagina F) None of the above
There is very little resistance and a large amount of current flows in a(n) _____ circuit.
A. open B. long C. short D. closed
UNC stands for United National Coarse.
Answer the following statement true (T) or false (F)