If conductors are to be used in a location with a higher ambient temperature, the ampacity of the conductor must be ____.
A. kept constant
B. doubled
C. reduced
D. increased by 20 amperes
Answer: C
You might also like to view...
The development of the auxiliary view is sometimes shown by lines projected ___________________ from the slanted surface.
Fill in the blank(s) with the appropriate word(s).
The first industrial robots were ____________________ robots that were used to move material with little repetitive accuracy required.
Fill in the blank(s) with the appropriate word(s).
An electronically controlled, solid-state power control system designed as an alternate source to provide regulated AC power to critical loads if the normal power system fails is commonly known as a(n) _____.
a. generator set b. transfer switch system c. static inverter d. static uninterruptible power supply
Many ________ customers purchase ISDN specifically to increase their access speed to the Internet
Fill in the blank(s) with correct word