Which tool is most commonly used by automotive service technicians?
A) Pliers B) Hammer C) Wrench D) None of these
C
You might also like to view...
The standard electrode extension for FCAW-S with 0.045" (1.1 mm) wire and an insulating nozzle is _____
a. 1/4" to 3/8" (6 to 9.5 mm) b. 1/4" to 3/4" (6 to 19 mm) c. 1/2" to 1-1/2" (13 to 38 mm) d. 3/4" to 1-1/4" (19 to 32 mm)
The crankshaft is supported in the engine block by the ________
A) Flywheel B) Main bearings C) Thrust plates D) Rod bearings
To correct for drift between the sending and receiving oscillators, asynchronous communication systems ________
A) require periodic calibration by authorized service personnel B) coordinate transmissions with a recognized NIST time signal C) use the start bit of each data packet to resynchronize the oscillators D) use a third system oscillator to establish a reference frequency
Subtract the following decimal fractions: 92.75 yards - 15.18 yards =
What will be an ideal response?