In order to measure current
A) you must install the meter in the current path
B) you must connect the meter across the component
C) you must connect the meter in parallel
D) All of the above
A
You might also like to view...
Briefly describe what causes the armature to act as a generator in the process of dynamic braking.
What will be an ideal response?
The amount of alloy added to make high strength low alloy (HSLA) steel is typically ______.
a-between 6 and 8% b-about 10% c-about 5% d-less than 2%
Which of the following types of drawings helps when sizing fuses for a given application?
a. Building elevation drawing b. Large-scale detail c. Single-line schematic d. Floor plan
If the chromium-nickel content of a stainless steel is referred to as 25-12, then it contains ____.
A. 25 percent nickel and 12 percent chromium B. 75 percent chromium and 8 percent nickel C. 25 percent chromium and 12 percent nickel D. 75 percent nickel and 8 percent chromium