Which of the following is true regarding service hotlines?
A) The hotline technician often is a specialist in the particular manufacturer in question
B) A monthly fee is charged for a specific amount of access time
C) Both A and B
D) Neither A nor B
C
You might also like to view...
All of the following statements are true EXCEPT:
A. a pressure regulator can become defective due to foreign material or a ruined diaphragm. B. high pressure is usually caused by a bad pressure regulator or on looped systems when a pressure return line to the fuel tank is kinked. C. if gasoline drips from the vacuum hose when it is removed from a fuel pressure regulator, it is defective. D. fuel pressure regulators usually fail by causing pressure that is too high rather than too low.
A support column in the shape of a frustum of a right circular cone has a slant height of 12.25 feet. The smaller base is 13.00 inches in diameter and the larger base is 18.75 inches in diameter. Compute the volume in cubic feet rounded to 3 significant digits.
Fill in the blank(s) with the appropriate word(s).
When the spindle contacts the anvil on a standard 0 -1" English micrometer, it should read which of these values in inches?
A) 0.050 B) 0.001 C) 0.025 D) 0.000
Answer the following statement(s) true (T) or false (F)
1. All motor circuits are protected for both overcurrent and overload conditions. 2. Overcurrent is a low intensity fault current condition caused by accidental short-circuits and ground-faults. 3. Overload is a lower intensity current condition caused by a mechanical overload on the motor. 4. Overload protection is provided before the contactor unit and after the motor being protected. 5. The overload unit controls the normally closed set of overload contacts, which are connected in the control circuit.