Technician A says that the brake pedal should be depressed with as much force as possible during the normal bleeding procedure. Technician B says that the brake pedal should be pumped rapidly during this manual bleeding procedure to force the air down toward the bleeder valve(s). Which technician is correct?

A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B


D

Trades & Technology

You might also like to view...

The efficiency of this Otto cycle is nearest:

Assume air with constant specific heats. The Otto cycle with r = 8


A) 43.5%
B) 47.5%
C) 49.5%
D) 52.5%

Trades & Technology

The cutting speed for carbide tools is normally three to four times higher than high-speed cutting tools

Indicate whether the statement is true or false

Trades & Technology

Which is a primary safety requirement when replacing an older furnace?

A) Removing the jumper B) Properly grounding the furnace cabinet C) Relocating the thermostat D) Properly discarding used materials

Trades & Technology

In the above figure, when the stop button is pressed, the N.O. CR contacts are ____________________ (open, closed) and the current through the armature _______________________________________ (flows through the resistor, is supplied through the motor control circuitry).

Fill in the blank(s) with the appropriate word(s).

Trades & Technology