If the transfer case fluid level is low, why should the technician also check the level of the automatic transmission?
A) The two both used ATF
B) The fluid levels are checked using the same access plug
C) There may be a leaking double lip seal between the two units
D) The two use the same oil pan
C) There may be a leaking double lip seal between the two units
You might also like to view...
?When plastics pieces are dissolved in a volatile solvent in casting, hardening occurs as a result of _____.
A. ?catalysts B. ?added heat C. ?solvent evaporation D. ?high pressure
In the process of qualifying and certifying the WPS, if the test samples do not pass the applicable test, ____.
A. the WPS is discarded and a new one is written B. the WPS parameter values are changed as feasible, and the samples rewelded C. make sure the samples were welded by a welder certified for the process D. the test samples are submitted in any event
What is a primary place for food storage in the plant?
a. stems c. leaves b. roots d. nodes
In a wastewater cooled system, the difference between the condensing temperature of the refrigerant and the leaving water temperature is approximately ____.
A. 10°F B. 20°F C. 30°F D. 40°F