During assembly of pushrod V-type engines, it is best to adjust ____________________ preload before the intake manifold is installed because you will be able to see that the lifters are on the heel of the cam lobes and are positioned low in their bores.
Fill in the blank(s) with the appropriate word(s).
hydraulic lifter
You might also like to view...
The person in charge of enforcing the building code is generally called a ______.
A) code in-charge. B) building code representative. C) building official. D) building code spokesperson. E) none of the above.
All of the following statements are true of the System 4 approach except that
a. it holds that the bureaucratic model has numerous drawbacks. b. it advocates a System 4 design. c. it is not presented as a universal guideline. d. its premise is that most organizations start with a System l design. e. organization design can be described as a continuum.
Airflow pattern must be taken into account so that the refrigerant sensor is:
A) Mounted on the ceiling by the potential leak source. B) Mounted upstream from the potential leak source. C) Mounted near the door by the potential leak source. D) Mounted downstream from the potential leak source.
Lean practices will change the material requirements planning process by:
A) increasing the need for netting. B) reducing the number of levels in the bill of material. C) making the bill of material more complex. D) eliminating the need for MRP. E) increasing the need for offsetting.