Which unit contains a desiccant to remove moisture from the system?
A) Receiver-drier
B) Accumulator
C) Evaporator
D) Both A and B
A) Receiver-drier
You might also like to view...
A company executive assigned importance values between 0 and 100 to five attributes included in an alternative evaluation process. Determine the weight of each attribute using the importance scores.
What will be an ideal response?
When the clutch engages, spring force clamps the friction disc between the flywheel and the ______
A) Release bearing B) Transmission input shaft C) Ring gear D) Pressure plate
In Example 14-1, the voltage drop across the parallel branches can be calculated from which of the following laws?
A. Kirchhoff's voltage law B. Ohm's law C. Kirchhoff's current law D. Henry's law
A cylindrical object with a constant shape has a 28 cm hole drilled in it from one end of the object to within 10 cm of the other end. Another smaller hole is drilled in the object from the side of the object at a 45° angle through to the drilled hole in the middle of the object. The smaller hole intersects the center drilled hole at 4 cm from the bottom of the center drilled hole. Choose the best option for this object shown on a print from the following suggestions.
A. A revolved section broken away so the section can be dimensioned and section lines put in. B. An auxiliary section projected directly from the view of the cutting plane line. C. A broken out section with a small break line to clarify the interior dimensions. D. A conventional revolution so that the object will not be distorted by foreshortening. E. A revolved section broken away so the section can be dimensioned.