When used, where is a starter safety switch likely to be located?
A. standard transmission
B. automatic transmission
C. either a standard or automatic transmission
D. ignition key
Answer: C
You might also like to view...
Process technicians might have to work with:
A) Transportation equipment B) Earth-moving equipment C) Heavy-lifting equipment D) All of the above
Explain the component trade -off method in IECC and how it differs from the prescriptive method.
What will be an ideal response?
You built a retaining wall 15 feet long and 5 stones high, using stones 15 inches wide, 6 inches high, and 10 inches deep. You first needed a footer 12 inches wide with 4 inches of crushed stone in the bottom. You added 1.5 inches of stone dust, then a row of stone with the top level with the ground.
a. How deep is the footer? b. How many cubic feet of dirt were removed? c. How many cubic feet of crushed stone were used? d. How many cubic feet of stone dust were used? e. How many stones were used in the footer? f. What is the height of the wall in feet? g. How many stones are in the wall above ground?
When engineering changes necessitate one or more modifications to be made to a circuit board, the new wiring should be done on the ____________________ side of the board.
Fill in the blank(s) with the appropriate word(s).