How do you measure camshaft endplay?

A. The installed camshaft is gently forced backward then forward measured with a dial indicator.
B. The installed camshaft is rotated and measured with a dial indicator.
C. Install the camshaft and start the engine, measure any backward or forward movement with a dial indicator.
D. Using the camshaft endplay sensor data from the PCM.


Answer: A

Trades & Technology

You might also like to view...

Gypsum board panels used on curved walls are generally

A) 1/8 in. thick. B) 3/8 in. thick. C) 1/4 in. thick. D) 5/8 in. thick. E) 1/2 in. thick.

Trades & Technology

Flanged joints should be tightened in increments of _____ percent.

a. 20 b. 25 c. 30 d. 50

Trades & Technology

Which of the following eliminates the need for taping and the use of filler tape?

a. Motor connection kit b. Heat-shrink insulator c.Wire nut d. Parallel-tap connector

Trades & Technology

Using a waste factor of 5 percent, determine the number of cubic yards of concrete needed to pour two of the piers in Figure 11.40.

What will be an ideal response?

Trades & Technology