The two windings in the solenoid are the pull-in and the hold-in.

Answer the following statement true (T) or false (F)


True

Trades & Technology

You might also like to view...

The Dust Bowl was due to water erosion

a. True b. False Indicate whether the statement is true or false

Trades & Technology

Searching for ways to cut costs and increase profit, one of the industrial engineers at Home Comfort Furniture Manufacturers, Inc. deter­mined that the equivalent annual worth of an ex­isting machine over its remaining useful life of 2 years is $70,000 per year. The IE also determined that used machines like the one currently in use are not available any longer, but the defender can be replaced with a challenger that is more ad­vanced. It will have an AW of $80,000 if it is kept for 2 years or less, $75,000 if it is kept be­tween 3 and 4 years, and $65,000 if it is kept for 5 to 10 years. If the company uses a specified 3-year planning horizon and an interest rate of 15% per year, determine (a) when the company should replace the machine, and (b) the AW for the next 3 years.

What will be an ideal response?

Trades & Technology

Technician A says that changing connecting rod length changes engine stroke. Technician B says that changing connecting rod length changes the position of the piston in the cylinder. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

An oxygen sensor is being tested with a digital multimeter (DMM) using the MIN/MAX function. The readings are: minimum = 78 mV; maximum = 932 mV; average = 442 mV. Technician A says that the engine is operating normally. Technician B says that the oxygen sensor is skewed too rich. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology