With the ignition off and the key out of the ignition, what should happen if a technician uses a screwdriver to gently push on the throttle plate in an attempt to open the valve?
A) The throttle should move, and then spring back to the home position when released.
B) The throttle should move closed, but not open further than the default position.
C) Nothing. The throttle should be kept from moving by the motor, which is not energized with the key off.
D) The throttle should move and stay where it is moved and not go back unless moved back.
A
You might also like to view...
Sheep and goats are two of the oldest known domesticated livestock species.
Answer the following statement true (T) or false (F)
Which one of the following troubleshooting techniques is NOT useful for sequencer problems?
A) When troubleshooting a sequencer problem with a large database having many elements, start with just a small data set. B) If an SQO instruction is used with a timed input, then replace the timed input with a manual switch or forced input instruction to manually step through the sequencer file while all the sequencer outputs and machine actions are verified. C) Verify the instruction parameters, especially the length value. D) In applications where the sequencer instruction is false during the first PLC scan, verify the 0 position was included in the length value.
A device that is designed to reach deep inside a machine, magnifies like a microscope, and has its own light
source is the optical _____. a. comparator b. borescope c. telescope d. camera
Junction diodes have a forward voltage drop of about ____ volts for silicon.
a. .4 b. .7 c. 1.4 d. 1.7