What will the following code display?
int number = 6;
int x = 0;
x = number--;
cout << x << endl;
a. 6
b. 5
c. 7
d. 0
a. 6
You might also like to view...
Configure the network routers (R1 and R2) and computers PC1 and PC2 to operate in the network using the IP addresses, subnet masks, and gateway addresses specified in Table 1. You are to also configure Routing Information Protocol (RIP) routing between the two networks.
1. Configure the IP address and subnet masks for Routers R1 and R2 and PC1 and PC2. List the steps taken to accomplish this task. List the router prompts and commands for each task.
2. Configure RIPv2 routing for the network. List the router prompts and commands to accomplish this task.
3. Verify that the network routing is properly configured. Discuss the steps you took to accomplish this. Make corrections to the network configurations as needed.
4. In this step, you will create an ACL on Router R1 that filters all User Datagram Protocol (UDP) traffic coming into the serial 0/0/0 interface on Router R1. You will also allow all other traffic, including Internet Control Message Protocol (ICMP), to enter the network. You can simulate UDP traffic by issuing the traceroute command, and you can simulate ICMP traffic by issuing the ping command. Given this information, create an access list that meets this requirement. Note that when testing your access list you will issue the traceroute and ping commands from Router R2
Where is IPv6 running on a device if the device is running at "wire speed?"
A. in an ASIC B. in software C. in flash memory D. in the CPU
You can use Excel's ________ feature to automatically adjust rows and columns to accommodate their contents
Fill in the blank(s) with correct word
_____ result from a decrease in expenses, an increase in revenues, or both.
A. ?Tangible benefits B. ?Intangible benefits C. ?Agile benefits D. ?Ethical benefits