Before attempting to install the transmission, be sure that the ____________________ is seated correctly on its pivot.

Fill in the blank(s) with the appropriate word(s).


clutch fork

Trades & Technology

You might also like to view...

On a project, actual negotiations can begin _____.

a. after the bid has been negotiated and awarded b. during the bidding process c. at the first coordination meeting d. during the review of the scope statement

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. The space above a suspended ceiling where ductwork is run is known as the plenum. 2. The type of insulation does not affect the capacitance of the cable. 3. Foil shielding offers lower DC resistance and increases the strength of the cable. 4. Braided shielding can achieve 100% cable coverage. 5. Unwanted transfer of signals from one conductor to another is called crosstalk

Trades & Technology

Which of the following IC logic families are most susceptible to static discharge?

A) TTL B) CML C) ECL D) MOS

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. When the 555 timer has pin #2 connected to pin #6, this permits the timer to retrigger itself at the end of each time cycle.
2. When the 555 timer triggers, two things happen at the same time: the output turns on and the discharge turns on.

3. In the accompanying figure, when the discharge at pin #7 turns off, capacitor C1 begins charging through resistors R1 and R2.
4. In the accompanying figure, the time it takes C1 to discharge is determined by the resistance of C1 and the capacitance of R2.
5. In the accompanying figure, pin #2 being connected to pin #6 permits the timer to retrigger itself at the end of each time cycle.

Trades & Technology