The hose load finish that is designed to have the last section of hose loosely laid across the hose bed is the:
A. straight finish
B. reverse horseshoe finish
C. skid load finish
D. minuteman finish
Answer: A. straight finish
You might also like to view...
DC-AC clamp-on ammeters use the ____ effect as the basic principle of operation.
a. Ohm b. Seebeck c. Lenz d. Hall
Answer the following statement(s) true (T) or false (F)
1.Schedule 40 rigid polyvinyl chloride (Type PVC) conduit has a smaller inside diameter than Schedule 80 rigid nonmetallic PVC conduit. 2.On a duplex receptacle, the silver screw is used to terminate the white grounded conductor of a 120-volt residential branch circuit. 3.On a GFCI receptacle, the incoming power is connected to the line terminals. 4.Manufacturers of nonmetallic sheathed cable color code a 12/2 Type NM cable with the color orange. 5.A wirenut is the most common wire connector used by electricians to splice together two or more conductors.
A house will have an electric range that has a nameplate rating of 11.5 kW. What is the branch circuit load for the range?
What will be an ideal response?
Technician A says that when the first and fourth clutches are applied in an Allison hydromechanical 4-speed transmission, the output will be reverse. Technician B says that when the first and fourth clutches are applied in an Allison 5-speed transmission, the output will be reverse. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B