The spring rate of a spring is measured in units of ________

A) ft-lb. B) psi C) in-lb. D) lb per inch


D

Trades & Technology

You might also like to view...

To ensure that the building is constructed per the provisions of the building code of the city and the approved CD set given by the city to the owner (as part of the building permit), the building is inspected at several stages by the city's building department. If during an inspection, a gross violation of a building code provision or of the approved CD set is discovered, what would the city

normally do? What will be an ideal response?

Trades & Technology

The efficiency of the ideal Rankine power cycle is much lower than that of a Carnot cycle between the same temperature limits. The primary reason is:

A) Friction losses in the turbine. B) Heat transfer in the boiler. C) The pressure rise across the pump. D) Losses in the pipes connecting the components.

Trades & Technology

List the eight systems of the body

What will be an ideal response?

Trades & Technology

?What is the minimum acceptance criteria for root reinforcement for visual inspection of butt welds?

A. ?3/32 in (2.4 mm) B. ?1/16 in (1.6 mm) C. ?1/8 in (3.2 mm) D. ?no reinforcement allowed

Trades & Technology