Fluid exchange can be performed using ________

A) A machine that forces the old fluid out, using a pump inside the machine that is attached to the fluid inlet after removing the transmission pan and filter
B) Drain and refill three times
C) A machine that replaces the ATF through the cooler lines
D) All of the above


D

Trades & Technology

You might also like to view...

Two common types of metal roofing systems are the lap-seam roof and the _____.

a. seamless roof b. standing-seam roof c. laminated sheet roof d. interlocked seam roof

Trades & Technology

The amount of prime coat that is applied prior to HMA paving should be limited to the amount that _____.

a. adequately covers the subgrade soil b. fills the joints to the upper ring c. can be absorbed by the base in 24 hours d. will evaporate in a 12-hour period

Trades & Technology

Technician A says to never remove the radiator cap from a hot engine. Technician B says that leaking coolant may cause a grayish white stain. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

This factor would NOT be one influence that initiates changes in heavy equipment machine design:

a. fuel efficiency b. weight reduction c. operator comfort d. emission reduction legislation

Trades & Technology