If a load is purely inductive and the reactive power is 10 VAR, the apparent power is ________

A) 10 VA B) 3.16 VA C) 1.144 VA D) 14.14 VA


A

Trades & Technology

You might also like to view...

When an electric arc occurs in air, gas molecules in the air ____.

A. become polarized B. become ionized C. form dimers D. start a chain reaction

Trades & Technology

Pervious asphalt is installed with ____.

A. an 8-inch sub base and an open structure in the finish layer that is different from pervious concrete B. the same sub base and a similar open structure in the finish layer as pervious concrete C. a very shallow sub base and a similar open structure in the finish layer as pervious concrete D. the same sub base as pervious concrete but an open structure in the finish layer that is different from pervious concrete

Trades & Technology

Why are the input variables to a PAL buffered?

A) To prevent loading by a large number of AND gate inputs B) To protect the inputs during programming of the PAL C) To allow the input to be enabled D) To prevent power drain when the inputs are not changing

Trades & Technology

In the accompanying figure, the item identified as number 2 represents a(n) ____ weld.

A. lap B. butt C. corner D. tee

Trades & Technology