Technician Asays excellent refinishing results can be achieved with an on-vehicle lathe. Technician B says one advantage of an on-vehicle lathe is that the rotor does not have to be removed from the spindle or the hub. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: C
Trades & Technology
You might also like to view...
Figure 15-6
In the accompanying diagram, a(n) ____________________ controls the operation of the compressor.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
Which wire on a TP sensor should be back probed to check for a voltage signal to the PCM?
A) Ground wire
B) Meter should be connected between 5-volt reference and ground
C) 5-volt reference (Vref)
D) Signal wire
Trades & Technology
Explain the difference between an OSHA standard and an OSHA regulation
What will be an ideal response?
Trades & Technology
Solar air collectors are mounted vertically on ____ facing walls or on a roof slope.
A. north B. south C. east D. west
Trades & Technology