Which of the following statements is TRUE regarding a brazing project on a 3/16 in pipe with a 3 tip, the acetylene and oxygen regulators set at 7 psig, and that begins with heating the pipe first?

A) The acetylene regulator should be below 6 psig.
B) The tip size is incorrect for a 3/16 in pipe.
C) The oxygen regulator should be below 6 psig.
D) The pipe should not be heated first while brazing.


A

Trades & Technology

You might also like to view...

Heat can be transferred from a refrigerant to the outdoors on a hot day because the _____.

a. refrigerant is cooler than the outdoor air b. refrigerant is warmer than the outdoor air c. refrigerant and the air are at the same temperature d. condenser is colder than the evaporator

Trades & Technology

Los electrodos de placa, pica y tubería deben tener una resistencia a tierra igual o inferior a _____ ohmios.

a. 10 b. 25 c. 40 d. 60

Trades & Technology

Why should deionized water be used for cooling high-amperage plasma torches?

A. It is free of materials that can clog the small internal openings in the torch. B. It is free from conductive ions that can damage torch parts over time. C. It will not freeze in cold weather. D. Both a and b are correct.

Trades & Technology

A special type of concrete for use in high-temperature applications is _____

a. no-fines concrete b. self-consolidating concrete c. refractory concrete d. high-performance concret

Trades & Technology