A 1000-kg car approaches an intersection traveling north at 20.0 m/s. A 1200-kg car approaches the same intersection traveling east at 22.0 m/s. The two cars collide at the intersection and lock together
Ignoring any external forces that act on the cars during the collision, what is the velocity of the cars immediately after the collision? A) 29.7 m/s in a direction 47.7° east of north
B) 21.1 m/s in a direction 47.7° west of south
C) 15.1 m/s in a direction 52.8° east of north
D) 21.1 m/s in a direction 52.8° east of north
E) 21.1 m/s in a direction 47.7° east of north
C
You might also like to view...
A rod of 2.0-m length and a square (2.0 mm × 2.0 mm) cross section is made of a material with a resistivity of 6.0 × 10^?8 ? / m. If a potential difference of 0.50 V is placed across the ends of the rod, at what rate is heat generated in the rod?
a. 3.0 W b. 5.3 W c. 8.3 W d. 1.3 W e. 17 W
An alloy of 80 atomic % arsenic and 20 atomic % gallium is produced, and the alloy is heated to 1250°C to thoroughly melt the mixture. The alloy is then slowly cooled so that it is always close to equilibrium. Answer the following about the alloy:
(a) At what temperature does a solid first form?
(b) What is the chemical composition of the first solid to form?
(c) Below what temperature is the alloy completely solid?
(d) At room temperature (23°C), what phases are present, what are their chemical compositions, and what is the atom fraction of each phase present?
What form of interplanetary debris did mankind discover first? Why?
What will be an ideal response?
Conservation of __________ is observed in strong and electromagnetic interactions, but not in weak interactions
Fill in the blank(s) with correct word