The ____________________, or electromotive force, is the voltage between the electrodes of a voltaic cell.
Fill in the blank(s) with the appropriate word(s).
cell potential
You might also like to view...
Which of the following is the symbol for an open roof tank?
A. 
B. 
C. 
D. 
Technician A says that the purpose and function of the IAT sensor is to provide the engine computer (PCM) with the temperature of the air entering the engine. Technician B says that the IAT sensor information is used for fuel control (adding or subtracting fuel) and spark timing, depending on the temperature of incoming air. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
All of the following statements about brake drum measuring and condition are true EXCEPT:
A. if the highest and lowest measurements taken at any straight-line position across the drum vary by 0.006 inch or more, machine the drum to correct the problem. B. the diameter measured at the deepest groove must be 0.030 inch (0.75 mm) or more under the discard dimension. C. drums that are smooth and true but exceed the new diameter by 0.090 inch or more should be reused without turning. D. even slightly rough drum surfaces should be turned to ensure a true drum surface.
Which coupling requires no lubricant?
A. gear. B. chain. C. rubbertire. D. flexible grid.