Para las _____ , deben utilizarse superficies que minimicen la radiación.
a. aplicaciones calientes
b. aplicaciones frías
c. barreras de vapor
d. aplicaciones al aire libre
a. aplicaciones calientes
You might also like to view...
If any equipment problems are noted during the pre-shift inspection, the operator should _____.
a. use the equipment with caution until it can be sent in for service b. perform a field repair to avoid holding up the schedule c. make a note of it and proceed with operation d. notify the supervisor or manager, then lock out and tag the equipment so that it cannot be used
A scan tool can be used to test a MAP sensor by monitoring the injector pulse width (in milliseconds) when ________ is being applied to the MAP sensor
A) Ground B) Air pressure C) Vacuum D) Voltage
Technician A says that voltage is usually indicated on the horizontal display axis. Technician B says that time is usually indicated on the horizontal display axis. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
What advantage do piezoelectric actuators offer over solenoid actuators?
A. Faster response and lower power requirements. B. Much better dependability. C. Faster response and higher injection pressures. D. Cheaper to manufacture.