Technician A says that spring hammering means a spring-like hammer is used. Technician B says that a slapping file is a rough-out tool. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
D. Neither Technician A nor B
You might also like to view...
A mortar-capturing device in a brick veneer assembly is used
A) at each alternate floor level. B) at each floor level. C) 2 in. above a flashing. D) immediately above a flashing. E) immediately below a flashing.
If the ungrounded (hot) conductor comes in contact with a metal enclosure that is not grounded, a ____ will be present between the enclosure and the ground.
A. current B. voltage C. resistance D. reactance
If the tie rod ends become worn, which angle is most affected?
A) Toe B) SAI C) Camber D) Caster
Select the characteristics of a flake ice maker. You may select more than one
A) Uses hot gas bypass to release ice from the evaporator B) Continuous ice making and delivery C) Alternating ice making and harvest cycles D) Uses a slow-turning auger to crack off the ice E) Large rectangular evaporator F) Cylindrical evaporator