Which of the following statements best describes the reason the Code specifically requires bonding of conductive enclosures for service conductors?
A. Equipment on the line or supply side of the service disconnecting means is not provided
with overcurrent protection.
B. An effort is being made to keep all equipment at the same potential to reduce shock
hazard.
C. Such bonding will allow overcurrent protection provided by the utility company on the
secondary of its transformer to clear.
D. Such bonding will facilitate the operation of the main circuit breaker in the service
equipment.
A. Equipment on the line or supply side of the service disconnecting means is not provided
with overcurrent protection.
You might also like to view...
Mechanization:
A. only is used for growing crops intended for processing. B. does not allow precise management of plant growing and harvesting. C. began with the grain crops but is now used for nearly all crops in some way. D. is only available for large-scale farming.
How many forward ratios are there in a Caterpillar CX28 transmission
A. four B. five C. six D. continuously variable
__________ and wheel cylinders are the outputs of the hydraulic system.
Fill in the blank(s) with the appropriate word(s).
The overall length of a gear is the:
A. distance of the root diameter B. distance of the inside diameter C. distance of the outside diameter D. distance from the hub outside to the other side of the gear