What is a short block overhaul?
A. Overhauling of a small engine.
B. Replacement of just the power train components.
C. Overhauling of just the cylinder block.
D. Replacement of the engine cylinder block assembly.
Answer: D
You might also like to view...
A 12 volt test light is a good tool for testing voltage levels
Indicate whether the statement is true or false
Why is back-seating a manual service valve when installing a gauge manifold necessary?
A) So that no gauge ports are opened B) So that there is no pressure on the gauge port C) So that coolant is not lost D) So that the middle leg is opened
Set-up time specifies ________
A) the minimum time for the control levels to be maintained on the inputs prior to the triggering edge of the clock in order for data to be reliably clocked into the FF B) how long it takes the output to change states after the clock has transitioned C) the maximum time interval required for the control levels to remain on the inputs before the triggering edge of the clock in order for the data to be reliably clocked out of the FF D) how long the operator has in order to get the flip-flop running before the maximum power level is exceeded
What is the difference between a standard liquid line drier and a filter that is designed to be used following a flush procedure?
A) Cleanup driers are all biflow driers. B) Cleanup driers will remove smaller particles but less moisture. C) Regular driers are all biflow driers. D) Regular driers will remove smaller particles but not much moisture.