Checking a delta connection for proper connection is called ____.
a. loading
b. cropping
c. mitigating
d. phasing
d. phasing
You might also like to view...
When a manufacturer issues a mandatory action for a remotely piloted aircraft, specify when the pilot of the aircraft must ensure that actions have been taken.
A. Before the next take-off. B. When performing maintenance work on the aircraft. C. During the periodic inspection, according to the maintenance calendar. D. Before the day of the operations.
Answer the following statement(s) true (T) or false (F)
1. A common method for verifying a profile tolerance is to use a CMM. 2. If a profile tolerance with no datum references is applied to a surface, it will control deviations in form only. 3. A multiple single-segment feature control frame can contain as many as three segments. 4. A composite profile tolerance can only be applied to a pattern of surfaces. 5. In certain cases, a profile of a line tolerance is used as one segment in a multiple single-segment profile tolerance. In this case, the profile of a surface tolerance in the lower segment controls the size, location, and orientation of the conical surface. The profile of a line tolerance in the upper segment controls the orientation and form of the line elements (in one direction) of the conical surface.
Pipe ____________________ when heated and ____________________ when cooled.
Fill in the blank(s) with the appropriate word(s).
7/8 รท 7/16 = _____. Reduce your answer to the lowest terms
a. 7/32 b. 7/2 c. 1 d. 2