To make sure the fluid in the reservoir is at the proper operating level, ________
A) take a reading from the fluid meter B) contact the control center
C) examine the fill point D) look at the reservoir sight glass
D
You might also like to view...
When running a truck on a chassis dynamometer, what gear ratio should be selected for most of the test sequence?
A. the lowest gear B. the highest gear C. 1:1 ratio D. highest gear in low range
Answer the following statement(s) true (T) or false (F)
1. More often than not, the conversion process from one type of energy to another is a complex one that requires many intermediate steps. 2. Frictional heat causes surface atoms to give up their valence electrons, giving rise to accumulated, nonmoving charges known as static electricity. 3. The word cell refers to a basic arrangement of a chemical substance, the electrolyte, interacting with two similar electrodes. 4. Most of the life-sustaining energy encountered on our planet is derived from the sun in the form of heat and light energy. 5. Thermoelectric effects utilizing temperature differentials to generate an electrical voltage have been known only since the 1950s.
The “dry” plate clutch is often used in automobile drive train applications to transmit power from the engine to the driving wheels. An illustration of the clutch is shown below.
The input to the clutch is torque, 
, and the output is speed, 
. The impedances are based on torque as the flow variable and angle as potential variable. Speed is found by differentiating the potential variable.
a. Construct the impedance diagram and label all signals.
b. Compute the transfer function; 
What will be an ideal response?
Technician A says that volumetric efficiency is a comparison of the actual volume of air-fuel mixture drawn into the engine to the theoretical minimum volume that can be drawn into the cylinder. Technician B says that a supercharger consumes some engine power as it forces a greater amount of air into the cylinders for more power. Who is right?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B