The purpose of a seat belt pretensioner is ________
A) To force the occupant into position against the seat back
B) To remove slack from the safety belt
C) Both A and B
D) Neither A nor B
C
You might also like to view...
When you are installing a prehung door, what should be done with the factory-installed spacer shims between the door and the frame?
a. Leave them in place permanently. b. Remove them after the door is attached to the rough opening. c. Remove them before you start the installation. d. Remove them when the door is in place, but before you attach it to the rough opening.
List all the groups into which the breeds of dogs are divided
What will be an ideal response?
A room has a length of 20' and a width of 10'. What is the area of the room in square meters?
a. 18.58 b. 56.28 c. 200 d. 2,152.99
Name the section produced when the cutting plane is parallel to the short axis of the structure, and is often referred to as a cross section. The cutting plane for this section is usually parallel to the materials used to frame the roof, ceiling, and floor systems and generally shows the shape of the structure better.
What will be an ideal response?