ASTM and SAE created a combined numbering system for metals and alloys.
Answer the following statement true (T) or false (F)
True
You might also like to view...
Which of the following terms is sometimes used in place of the term "incident"?
A) Accident B) Safety breakdown C) Hazard prevention failure D) Near miss
Under what conditions would the borrowing of new material from a borrow pit for a highway embankment be preferred over using material excavated from an adjacent section of the road?
What will be an ideal response?
You built a rectangular deck 16 feet long and 8 feet wide with a set of steps 36 inches wide. You built a railing on the outside using 2X4s around the top, capped with a 6-inch deck board. The spindles are spaced on 4-inch or less centers. You built a rectangular patio 12 feet by 16 feet with a 4-inch concrete floor. For the patio you were required to remove 7 inches of dirt and replace it with 3 inches of sand.
a. How many square feet are in the deck? b. How many deck boards were needed for the floor running the length of the deck? 2 CHAPTER 12 • Landscaping © 2012 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. c. How many of what length 2X4s and deck boards were needed for the railing? d. Approximately how many spindles were needed? e. What is the area of the patio? f. How many cubic feet of dirt were removed? g. How many cubic feet of sand were needed? h. How many cubic yards of concrete were needed?
What's the last step for man manicure?
What will be an ideal response?