What is the current in a parallel RLC circuit if its impedance is 0.22 M?, Q is 100 and VS = 50 V?
A) 0.227 mA B) 2.27 mA C) 22.7 mA D) 0.0227 mA
A
You might also like to view...
____ is the measurement of how much work is accomplished in a specific amount of time, with time being the differentiating focus.
a. Power b. Torque c. Work d. Energy
A CNC machine tool table is powered by a servo motor, lead screw and optical encoder. This lead screw has a pitch of 5mm and is connected to the motor shaft with a gear ratio of 16:1 (16 turns of the motor for one turn of the lead screw). The optical encoder is connected directly to the lead screw and generates 200 pulses per revolution of the lead screw. The table must move a distance of 100mm at a feed rate of = 500mm/min. Determine (a) pulse count received by the control system to verify that the table has moved exactly 100mm, (b) pulse rate, and (c) motor speed that corresponds to the feed rate of 500mm/min. If the range of the work table axis is 500mm and there are 12 bits in the binary register used by the digital controller to store the position, determine the control resolution.
What will be an ideal response?
What are some range management practices that can be applied to benefit trout?
What will be an ideal response?
Is it better for the health of grass to leave the clippings or remove them?
What will be an ideal response?