Technician A says that in order for a planetary gear set to change the ratio and transmit torque, there must be an input and a reaction member. Technician B says that the turbine shaft is the primary input to the transmission. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
C) Both technicians
You might also like to view...
What is the difference between a hardwired and wireless network?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. A perpendicularity tolerance can only constrain rotational degrees of freedom relative to the datum referenced. 2. Perpendicularity can be applied to a planar surface, but not to a feature of size. 3. Where two datum references are used with a perpendicularity tolerance, the tolerance zone is perpendicular to the primary datum reference. 4. When a perpendicularity tolerance is applied to a planar surface, the deviation is verified by finding the distance between two parallel planes that all of the points of the surface are located within. 5. A common method used to verify a perpendicularity tolerance (MMC) is to use a height gage.
Which organization includes an effective government relations program representing the members' interest before Congress?
a. SAF c. AIFD b. AAF d. AFMC
What is the total inductance of a 40 mH inductor and a 24 mH inductor connected in parallel?
A) 150 mH B) 64 mH C) 15 mH D) 32 mH