Registers and grilles are typically installed:
A) After the house is framed.
B) After all the interior walls have sheetrock.
C) After most of the interior finish work is completed.
D) After the house is completely dried in.
C
You might also like to view...
Use the table in the accompanying figure to find the number of teeth given an outside diameter of 5.644 inches and a pitch of 1.771.
A. 5 B. 6 C. 8 D. 10
Si se está construyendo un edificio en el que se aplicará revestimiento sobre el entablado, se debe usar un entablado de un espesor mínimo de _____.
a. 3 ?8" (0.9 cm) b. 1 ?2" (1.3 cm) c. 5 ?8" (1.6 cm) d. 1" (2.54 cm)
To establish a straight reference line for installing the first course of siding, you should measure _____.
a. at four points on each side of the building b. down from the eaves c. up from the ground d. along the top of the foundation
A gauge that only measures pressure above 0 psig is called a ____________________ gauge and is usually connected to the ____________________ side of the refrigeration system.
Fill in the blank(s) with the appropriate word(s).