When drywall nail heads work up from under the finished surface after installation is complete, the job is

said to have _____.

a. dimples
b. nail pops
c. nail bumps
d. ripples


b

Trades & Technology

You might also like to view...

Consider a propane (1) + n-butane (2) system at 348.15 K. If you assume an ideal gas for this system, what will be the value of the mixture fugacity coefficient for propane when the composition of propane in the mixture is 46% by mole?

A. 0 B. 1 C. 0.46 D. 1.46 E. The pressure is required to make the calculation.

Trades & Technology

In the accompanying figure, the item identified as number 2 identifies the ____ symbol.

A. tail B. arrowhead C. dimensions of weld D. root opening

Trades & Technology

Recompute the reactions, draw the shear and moment curves for the beam in Figure P9.6 if support B settles by 1.5 in.. Check and compare your answer to that obtained using RISA-2D, and compare the change in reaction when B settles by 0.75 in., 3.0 in. What do you observe?

Trades & Technology

In an axial piston pump, the pistons are forced in and out of the cylinder as they slide around the _____

A) angled swash plate B) drive shaft C) port plate D) servo

Trades & Technology