When the air handler is located in an attic or overhead area, the condensate drain line should be routed to the __________ of the structure, if at all possible.

A. basement
B. inside
C. outside
D. rear


Answer: C

Trades & Technology

You might also like to view...

An insulated steam turbine produces 67,000 hp of power. Steam enters the turbine at 2000 psia and 1000°F, with a velocity of 400 ft/s, through a duct with a cross-sectional area of 0.20 ft2. The steam exits with a velocity of 30 ft/s, at a temperature of 420°F. Determine the exit pressure and, if applicable, the exit quality of the steam.

Given: P1 = 2000 psia; T1 = 1000°F; V1 = 400 ft/s; A1 = 0.20 ft2; T2 = 420oF ; V2 = 30 ft/s; W?=67000 hp=47,365 Btu/s; Steam Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?vPE = 0 What will be an ideal response?

Trades & Technology

Always clean the motorcycle before performing scheduled maintenance.

Answer the following statement true (T) or false (F)

Trades & Technology

The amount of ripple voltage at a power supply's filter output is inversely proportional to the values of the filter capacitor and load resistance. Thus, the

A) higher the load resistance, the greater the capacitor discharge between half-cycles of the input B) lower the load resistance, the greater the capacitor discharge between half-cycles of the input C) higher the filter capacitance, the greater the capacitor discharge between half-cycles of the input D) lower the filter capacitance, the lower the capacitor discharge between half-cycles of the input

Trades & Technology

One meter is equivalent to 0.3048 feet.

Answer the following statement true (T) or false (F)

Trades & Technology