Manual rebar cutters can be used to cut rebar in diameters up to _____.
a. 2 inches
b. 1-1/2 inches
c. 1 inch
d. 1/2 inch
d. 1/2 inch
You might also like to view...
Slip is best defined as __
a. the difference between the synchronous speed and the speed of the rotor in an induction motor b. the rated output capacity of a motor c. any current in excess of the rated current of equipment d. the speed of the revolving field of the stator
End grinding of the band ends before welding should be done:
A) On each end separately B) On the pedestal grinder C) With the teeth opposed D) With the teeth on the same side
Which configuration is necessary for a 7493 4-bit binary counter to count in binary from 0 through 15?
A) Both of the MR lines must be tied HIGH, and the input must be tied to Clock 1. B) One of the MR lines must be tied HIGH, and the input must be tied to Clock 0. C) Both clock inputs must be tied to the same input, and MR grounded. D) The Q0 output must be tied to the Clock 1, the clock input must be tied to Clock 0, and MR must be grounded.
The advantages of computer drawings are accuracy, speed and consistency.
Answer the following statement true (T) or false (F)